Seamless Resin Floors
The Acrylicon Variant System is an Industrial grade, mono-colour, self-levelling system which can be installed with or without scattered flakes and cures between 1-2 hours. The thickness of the floor may vary from 1mm to 3mm, depending on the level of impact resistance required by the customer and the quality of the substrate/concrete. With an extremely high compressive strength, the system is ultra-cleanable even with heavy traffic. The slip resistance can be adjusted based on the customer’s needs and specified regulations.
Designed for heavy industry and clean environments, for example, heavy engineering, laboratories, clean rooms, paper mills, pharmaceutical and other areas where hygiene and cleanability are paramount.
The colours shown here are only a small sample of the wide range of colour options available. Different floor areas can have different colours and therefore colour coding for traffic areas is available to improve traffic ergonomics. AcryliCon Floor Systems have shown extreme resistance to ageing and discolouration due to UV attack.
We have made every effort to make the colours in this gallery match those that will appear on your finished floor. However, due to the nature of viewing this on a display screen, we cannot guarantee an exact colour match. To see a true colour sample or to arrange a site visit, please contact your nearest AcryliCon office.
Features & Benefits
High compressive strength - excellent durability and cleanability
1-2 hours cure time - rapid installation and minimum downtime
Slip resistant - our floors exceed minimum safety requirements and can be tailored to each area
Hard wearing - exceptional resistance to chemicals, abrasion, impact and fire
Chemical bond/cure - a truly seamless floor with no cold joints and virtually no risk of delamination
Long lasting - our floors do not degrade or become brittle with use