Copyright 2017, AcryliCon - All Rights Reserved

Offshore Floor Applications

Acrylicon / Products / Product Range / Offshore Floor Applications

1/2

The Acrylicon Industry System is a trowel applied mortar system with excellent compressive strength and tensile strength in bending. It is characterised by very low linear shrinkage, high wear resistance and unparalleled longevity. Due to Acrylicon’s ability to chemically bond, it can be combined with other Acrylicon Systems to provide a decorative finish. The cure time for installations above 5°C is 1-2 hours, even at temperatures down to -25°C, it is only 2-4 hours, meaning any downtime is reduced to a minimum.

 

Designed to withstand heavy-duty mechanical stress, both indoor and outdoor. Suitable for use in offshore applications, heavy engineering, freezers and as a heavy duty screed (up to 550mm thickness) for other Acrylicon Systems.

 

Contact your nearest AcryliCon office.

Features & Benefits

High compressive strength  - excellent durability and cleanability

1-2 hours cure time - rapid installation and minimum downtime

Slip resistant - our floors exceed minimum safety requirements and can be tailored to each area

Hard wearing - exceptional resistance to chemicals, abrasion, impact and fire

Chemical bond/cure - a truly seamless floor with no cold joints and virtually no risk of delamination

Long lasting - our floors do not degrade or become brittle with use