The Acrylicon Levelling Screed System is a solvent-free, 2 component methacrylic polymer mortar with high compressive and flexural strength. It is characterised by very low linear shrinkage and rapid curing, making it an ideal replacement for cementitious mortars and screeds. Acrylicon Levelling Screed can be applied in thicknesses of 5-550mm. The low shrinkage rate enables larger unevenness to be levelled out. The mortar surface resembles that of finished concrete.
Designed as an underlayment screed for Acrylicon Systems, levelling up of uneven substrates, creating falls to drains, bedding in drains, ramps, rail bedding, casting bridge bearings and repairing concrete. Can be used internally or externally.
Features & Benefits
Very low shrinkage - Excellent for covering large areas
1-2 hours cure time - rapid installation and minimum downtime
Mortar system - can be used to repair concrete or underlayment for other Acrylicon systems
Hard wearing - exceptional resistance to chemicals, abrasion, impact and fire
Chemical bond/cure - a truly seamless floor with no cold joints and virtually no risk of delamination
Non-porous surface and suitable for bedding in drains and wet use areas